Carmarthenshire · Wales
AGA and Range Cooker Removal in Llanelli
From oil-fired Rayburns to dual-fuel ranges, we clear heavy cookers out of Llanelli kitchens and leave the alcove ready for what comes next.
Our Llanelli coverage
Llanelli is in the Carmarthenshire council area in Wales. That includes the SA15 and SA14 postcode districts. We also take jobs in Pen-clawdd, Llangennech, Pwll and Brynhyfryd.
Local considerations in Llanelli
Wales has a lot of stone-built and terraced housing in its valleys and towns, and a wetter climate than most of England. In older Llanelli properties, an AGA may sit in an inglenook or chimney breast, and the surrounding brickwork needs protecting during dismantling. In Llanelli and across Wales, waste carriers must hold a registration with Natural Resources Wales, which you can check online.
Many Llanelli families replace an AGA with a modern range during an extension or kitchen refit, and we time the removal to suit the builder. If your Llanelli AGA sits in a kitchen-diner, we seal off the area as far as possible to limit insulation dust.
AGA and Range Cooker Removal jobs we handle in Llanelli
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
How much it costs in Llanelli
- Two-oven AGA dismantle and removal: £350–£550. Full on-site strip-down, insulation removal, clean-up and cast-iron recycling.
- Three or four-oven AGA: £450–£750. Longer dismantle and more castings to carry; route and access affect price.
- Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.
Prices are a guide. Your quote for Llanelli is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Llanelli
Do builders in Llanelli use your AGA removal service?
Yes. Kitchen designers and builders across Carmarthenshire use us to remove AGAs before a refit, saving their crews a heavy, dusty day and keeping the Llanelli project on schedule.
How much does AGA removal cost in Llanelli?
AGA removal in Llanelli typically costs £350–£550 for a two-oven model and £450–£750 for three or four ovens, including dismantling, clean-up and recycling. Fuel disconnection is extra if needed. Send photos for a fixed price.
Can you arrange an engineer to disconnect my AGA in Llanelli?
Yes. We can arrange a Gas Safe engineer, OFTEC technician or electrician in Llanelli, depending on your cooker's fuel, so it is safely isolated before our dismantling team arrives.
How long does AGA removal take in Llanelli?
Most two-oven AGA removals in Llanelli take three to five hours. Larger models, Rayburns with boilers, or long carries to the van can take most of a day. Switch the cooker off at least 24 hours beforehand.
How long does AGA removal take?
A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.
Will removing my AGA make a mess?
Dismantling an AGA is dusty because the oven castings are packed in insulation. A good team lays boards and dust sheets, vacuums insulation as each section comes out using an industrial extractor, and bags it immediately. The work area should be left swept and vacuumed, though we recommend moving delicate items out of the kitchen beforehand.
Helpful guides
Asbestos in Old AGAs and Range Cookers: What to Check
Older AGAs, Rayburns and other cast-iron cookers may contain asbestos in rope seals, gaskets, insulation, flue pipes or heat shields. You…
Read the guide →How Is an AGA Removed? The Dismantling Process Explained
An AGA is removed by dismantling it where it stands. A qualified engineer makes the fuel supply safe, then the team removes the lids, top…
Read the guide →Get a free aga and range cooker removal quote in Llanelli
Tell us what you need and we'll come back with a clear price.
Request a quote