AGA and Range Cooker Removal
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.

What's involved
Modern range cookers are not cast-iron heat-storage cookers, but they are still heavy, wide and easy to damage. A 110cm dual-fuel range typically weighs 120–170 kg, while premium French ranges can weigh far more. We usually send three people with furniture skates, a stair-climbing or heavy-duty trolley and boards to protect stone and timber floors. Oven doors, shelves, pan supports, handrails and splashback panels are removed to reduce weight and width, and the cooker is slid forward and walked out. Gas must be capped by a Gas Safe registered engineer and the electric connection isolated by a competent electrician. Most jobs take 45–90 minutes. If the cooker is in good working order we can advise whether it is worth selling, as some well-kept ranges are, and otherwise it goes to WEEE recycling with the steel recovered.
How we handle it
Send details and photos
Tell us the make, model, number of ovens, fuel type and whether it heats water or radiators. Photos of the cooker, its data badge, the flue and the route out let us plan and price accurately.
Fixed quote and plan
We confirm a single fixed price, the number of crew, how long the job should take, and which engineer is needed to disconnect the fuel supply. If the cooker may contain asbestos, we recommend testing first.
Disconnection and cooling
The cooker is switched off at least 24 hours before so the castings are cold. A Gas Safe, OFTEC or electrical engineer isolates and caps the supply, and any boiler circuit is drained.
Dismantling and removal
The team protects floors, strips the cooker into sections, vacuums insulation, and carries the castings out. A typical two-oven AGA takes three to five hours from start to clean-up.
Clean-up and recycling
The alcove is swept and vacuumed and the flue covered. Cast iron is recycled or sent for reconditioning, and you receive a waste transfer note for everything removed.
Price guide
AGA and range cooker removal is priced on the cooker's size and weight, how much dismantling it needs, the fuel type and the access. A modern range cooker is a short job. A four-oven cast-iron AGA with a boiler and an awkward route can take most of a day. Reconditionable cookers may lower the price.
- Fuel disconnection by qualified engineer: £75–£150. Gas Safe, OFTEC or electrical isolation, depending on the cooker's fuel type.
- Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.
- Three or four-oven AGA: £450–£750. Longer dismantle and more castings to carry; route and access affect price.
Questions about modern range cooker removal
How heavy is an AGA cooker?
A traditional two-oven cast-iron AGA weighs around 400 kg, and larger four-oven models weigh considerably more. That is why AGAs are never moved in one piece. They are dismantled on site into hotplates, oven castings and panels, the heaviest of which weigh roughly 50–90 kg and can be carried by two people.
How long does AGA removal take?
A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.
Can you remove a modern range cooker such as a Rangemaster?
Yes. Modern dual-fuel and gas range cookers are not dismantled like an AGA, but they are heavy and wide. We remove doors, shelves and panels to lighten them, then use skates and trolleys with a three-person team. The gas must be capped by a Gas Safe registered engineer before we move the cooker.
Other services
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Modern Range Cooker Removal near you
Get a free aga and range cooker removal quote
Tell us what you need and we'll come back with a clear price.
Request a quote