AGA and Range Cooker Removal

AGA and Range Cooker Removal

Rayburn, Esse and Stanley Removal

Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.

Free AGA and Range Cooker Removal quote

No obligation. We only use your details to reply about this job.

Rayburn, Esse and Stanley Removal — AGA and Range Cooker Removal

What's involved

Many Rayburns, Stanleys and some Esse cookers include a boiler that heats the radiators and hot water, so removal involves more than the cooker itself. The heating system must be drained down and the flow and return pipes capped by a plumber or heating engineer before dismantling starts, and the fuel supply isolated by a qualified technician. Once the cooker is cold and drained, the team removes the hotplate, doors, firebox components, boiler section and outer casing in sequence, bagging insulation and firebricks as they go. Solid-fuel models often have a firebox lined with refractory bricks and a heavy grate, which come out separately. A typical Rayburn takes two to four hours to remove. Let us know if the cooker heats your home, because you will need an alternative heat source arranged, and we can coordinate timings with your heating engineer so you are not left without hot water longer than necessary.

How we handle it

  1. Send details and photos

    Tell us the make, model, number of ovens, fuel type and whether it heats water or radiators. Photos of the cooker, its data badge, the flue and the route out let us plan and price accurately.

  2. Fixed quote and plan

    We confirm a single fixed price, the number of crew, how long the job should take, and which engineer is needed to disconnect the fuel supply. If the cooker may contain asbestos, we recommend testing first.

  3. Disconnection and cooling

    The cooker is switched off at least 24 hours before so the castings are cold. A Gas Safe, OFTEC or electrical engineer isolates and caps the supply, and any boiler circuit is drained.

  4. Dismantling and removal

    The team protects floors, strips the cooker into sections, vacuums insulation, and carries the castings out. A typical two-oven AGA takes three to five hours from start to clean-up.

  5. Clean-up and recycling

    The alcove is swept and vacuumed and the flue covered. Cast iron is recycled or sent for reconditioning, and you receive a waste transfer note for everything removed.

Price guide

AGA and range cooker removal is priced on the cooker's size and weight, how much dismantling it needs, the fuel type and the access. A modern range cooker is a short job. A four-oven cast-iron AGA with a boiler and an awkward route can take most of a day. Reconditionable cookers may lower the price.

  • Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
  • Fuel disconnection by qualified engineer: £75–£150. Gas Safe, OFTEC or electrical isolation, depending on the cooker's fuel type.
  • Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.

Questions about rayburn, esse and stanley removal

How long does AGA removal take?

A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.

What should I do to prepare for AGA removal?

Switch the cooker off at least a day before, arrange or confirm the fuel disconnection, and clear the kitchen of anything fragile. Empty the warming oven and remove any rails or utensils hung on the cooker. Make sure there is parking close to the door for a van, and tell us about steps or narrow corridors on the route.

Get a free aga and range cooker removal quote

Tell us what you need and we'll come back with a clear price.

Request a quote