AGA and Range Cooker Removal

AGA and Range Cooker Removal

Asbestos-Aware Removal of Older Cookers

Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.

Free AGA and Range Cooker Removal quote

No obligation. We only use your details to reply about this job.

Asbestos-Aware Removal of Older Cookers — AGA and Range Cooker Removal

What's involved

Some older cast-iron cookers, particularly those made before the 1990s, can contain asbestos in door rope seals, gaskets, flue pipes or the insulation around the ovens. Flue pipes in older installations are also sometimes made of asbestos cement. We do not guess. If the cooker or flue is old or its history is unknown, we recommend sampling by a qualified asbestos surveyor before dismantling begins. If asbestos is found, the affected parts must be removed by a contractor trained and equipped under the Control of Asbestos Regulations 2012, and disposed of as hazardous waste with the correct consignment paperwork. The rest of the cooker can then be dismantled as normal. Testing usually takes a few days to return results. This step protects you, your family and our team, and it avoids the costly decontamination needed if asbestos fibres are released into a kitchen during an unplanned strip-out.

How we handle it

  1. Send details and photos

    Tell us the make, model, number of ovens, fuel type and whether it heats water or radiators. Photos of the cooker, its data badge, the flue and the route out let us plan and price accurately.

  2. Fixed quote and plan

    We confirm a single fixed price, the number of crew, how long the job should take, and which engineer is needed to disconnect the fuel supply. If the cooker may contain asbestos, we recommend testing first.

  3. Disconnection and cooling

    The cooker is switched off at least 24 hours before so the castings are cold. A Gas Safe, OFTEC or electrical engineer isolates and caps the supply, and any boiler circuit is drained.

  4. Dismantling and removal

    The team protects floors, strips the cooker into sections, vacuums insulation, and carries the castings out. A typical two-oven AGA takes three to five hours from start to clean-up.

  5. Clean-up and recycling

    The alcove is swept and vacuumed and the flue covered. Cast iron is recycled or sent for reconditioning, and you receive a waste transfer note for everything removed.

Price guide

AGA and range cooker removal is priced on the cooker's size and weight, how much dismantling it needs, the fuel type and the access. A modern range cooker is a short job. A four-oven cast-iron AGA with a boiler and an awkward route can take most of a day. Reconditionable cookers may lower the price.

  • Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
  • Fuel disconnection by qualified engineer: £75–£150. Gas Safe, OFTEC or electrical isolation, depending on the cooker's fuel type.
  • Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.

Questions about asbestos-aware removal of older cookers

How long does AGA removal take?

A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.

What should I do to prepare for AGA removal?

Switch the cooker off at least a day before, arrange or confirm the fuel disconnection, and clear the kitchen of anything fragile. Empty the warming oven and remove any rails or utensils hung on the cooker. Make sure there is parking close to the door for a van, and tell us about steps or narrow corridors on the route.

Get a free aga and range cooker removal quote

Tell us what you need and we'll come back with a clear price.

Request a quote