Norfolk · Eastern
AGA and Range Cooker Removal in Norwich
Kitchen designers and builders working in Norwich hand us the AGA strip-out so their project starts on a clean slate across the East of England.
Norwich and the surrounding area
We cover all of Norwich and the wider Norfolk area. That includes the NR7, NR3, NR5, NR1, NR6 and NR2 postcode districts. The same team covers Cringleford, Rackheath, Spixworth, Costessey and Horsham St Faith too.
Working in Norwich
In Norwich detached homes, side access often gives a shorter route for castings than carrying them through the house. If your Norwich AGA sits in a kitchen-diner, we seal off the area as far as possible to limit insulation dust.
Across the East of England you find older timber-framed and brick cottages in the villages and large modern estates around the expanding towns. Flue pipes in older Norwich homes may be asbestos cement, so we recommend testing before any work starts.
Our services in Norwich
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Guide prices for Norwich
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
- Fuel disconnection by qualified engineer: £75–£150. Gas Safe, OFTEC or electrical isolation, depending on the cooker's fuel type.
- Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.
Prices are a guide. Your quote for Norwich is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Norwich
Can you remove a range cooker from my Norwich kitchen?
Yes. We remove modern range cookers in Norwich using a three-person team, skates and trolleys. The gas must be capped by a Gas Safe engineer first, which we can arrange.
Do you cover Great Yarmouth and Lowestoft as well as Norwich?
Yes. Our AGA and range cooker removal service covers Norwich and the wider area, including Great Yarmouth and Lowestoft, along with rural properties across Norfolk.
Is my old AGA in Norwich worth reconditioning?
It might be. Send photos of the enamel, hotplates, doors and data badge, and we will give an honest view. Good-condition cookers can reduce the removal cost for Norwich customers.
Do you remove Rayburns in Norwich?
Yes. We remove Rayburns, Stanleys and Esse cookers in Norwich and nearby Great Yarmouth. If the cooker runs your heating, a plumber must drain and cap the system first, and we can coordinate timings.
Will removing my AGA make a mess?
Dismantling an AGA is dusty because the oven castings are packed in insulation. A good team lays boards and dust sheets, vacuums insulation as each section comes out using an industrial extractor, and bags it immediately. The work area should be left swept and vacuumed, though we recommend moving delicate items out of the kitchen beforehand.
How heavy is an AGA cooker?
A traditional two-oven cast-iron AGA weighs around 400 kg, and larger four-oven models weigh considerably more. That is why AGAs are never moved in one piece. They are dismantled on site into hotplates, oven castings and panels, the heaviest of which weigh roughly 50–90 kg and can be carried by two people.
Helpful guides
Preparing for AGA or Range Cooker Removal: A Checklist
To prepare for AGA or range cooker removal, book the right engineer to make the fuel safe, turn the cooker off 24 to 48 hours ahead, have…
Read the guide →Asbestos in Old AGAs and Range Cookers: What to Check
Older AGAs, Rayburns and other cast-iron cookers may contain asbestos in rope seals, gaskets, insulation, flue pipes or heat shields. You…
Read the guide →Get a free aga and range cooker removal quote in Norwich
Tell us what you need and we'll come back with a clear price.
Request a quote