Kent · South East
AGA and Range Cooker Removal in Ramsgate
We dismantle and remove cast-iron AGAs, Rayburns and range cookers from homes across Ramsgate, recycling or reconditioning the castings.
Covering Ramsgate and nearby
Ramsgate falls within Kent, South East. Jobs here are mostly in the CT11, CT12 and CT10 postcode areas. The same team covers Broadstairs, Thanet and Cliffs End too.
What to expect in Ramsgate
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. Victorian and pre-war Ramsgate houses often have original tiled or flagstone floors, which we cover with boards before moving castings. Damp, salty air in Ramsgate can rust enamel edges and hotplate lids, which affects whether an old cooker is worth reconditioning.
Many Ramsgate families replace an AGA with a modern range during an extension or kitchen refit, and we time the removal to suit the builder. Suburban homes in Ramsgate usually have a driveway close to the kitchen door, which keeps a long dismantle running smoothly.
AGA and Range Cooker Removal services in Ramsgate
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
AGA and Range Cooker Removal prices in Ramsgate
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
- Modern range cooker, 90–110cm: £110–£180. Three-person team with skates and trolleys; fuel supply must be capped first.
- Two-oven AGA dismantle and removal: £350–£550. Full on-site strip-down, insulation removal, clean-up and cast-iron recycling.
Prices are a guide. Your quote for Ramsgate is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Ramsgate
Do you cover Margate and Deal as well as Ramsgate?
Yes. Our AGA and range cooker removal service covers Ramsgate and the wider area, including Margate and Deal, along with rural properties across Kent.
Can you remove a range cooker from my Ramsgate kitchen?
Yes. We remove modern range cookers in Ramsgate using a three-person team, skates and trolleys. The gas must be capped by a Gas Safe engineer first, which we can arrange.
Will AGA removal in Ramsgate damage my floor?
We lay protective boards and dust sheets before dismantling, and carry castings rather than dragging them. Original tiles and flagstones in older Ramsgate homes are covered carefully throughout.
What about asbestos in my old Ramsgate AGA?
Older cookers and flues can contain asbestos. If yours is old or its history is unknown, we recommend testing by a qualified surveyor in Ramsgate before dismantling so any asbestos is removed by trained specialists.
How long does AGA removal take?
A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.
Can you remove a modern range cooker such as a Rangemaster?
Yes. Modern dual-fuel and gas range cookers are not dismantled like an AGA, but they are heavy and wide. We remove doors, shelves and panels to lighten them, then use skates and trolleys with a three-person team. The gas must be capped by a Gas Safe registered engineer before we move the cooker.
Helpful guides
Asbestos in Old AGAs and Range Cookers: What to Check
Older AGAs, Rayburns and other cast-iron cookers may contain asbestos in rope seals, gaskets, insulation, flue pipes or heat shields. You…
Read the guide →Preparing for AGA or Range Cooker Removal: A Checklist
To prepare for AGA or range cooker removal, book the right engineer to make the fuel safe, turn the cooker off 24 to 48 hours ahead, have…
Read the guide →Get a free aga and range cooker removal quote in Ramsgate
Tell us what you need and we'll come back with a clear price.
Request a quote