Hampshire · South East
AGA and Range Cooker Removal in Waterlooville
Homeowners in Waterlooville and across Hampshire use us to remove old AGAs before refitting, with fuel disconnection coordinated in advance.
Rayburn or AGA removal across Waterlooville. Request your price.
Our Waterlooville coverage
We cover all of Waterlooville and the wider Hampshire area. Postcodes we cover here include PO7 and PO8. Nearby places we also cover include Horndean, Purbrook, Denmead and Rowlands Castle.
Local considerations in Waterlooville
If your Waterlooville AGA sits in a kitchen-diner, we seal off the area as far as possible to limit insulation dust. Many Waterlooville families replace an AGA with a modern range during an extension or kitchen refit, and we time the removal to suit the builder.
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. Flue pipes in older Waterlooville homes may be asbestos cement, so we recommend testing before any work starts.
AGA and Range Cooker Removal jobs we handle in Waterlooville
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
How much it costs in Waterlooville
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
- Fuel disconnection by qualified engineer: £75–£150. Gas Safe, OFTEC or electrical isolation, depending on the cooker's fuel type.
- Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.
Prices are a guide. Your quote for Waterlooville is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Waterlooville
Can you arrange an engineer to disconnect my AGA in Waterlooville?
Yes. We can arrange a Gas Safe engineer, OFTEC technician or electrician in Waterlooville, depending on your cooker's fuel, so it is safely isolated before our dismantling team arrives.
Is my old AGA in Waterlooville worth reconditioning?
It might be. Send photos of the enamel, hotplates, doors and data badge, and we will give an honest view. Good-condition cookers can reduce the removal cost for Waterlooville customers.
Will AGA removal in Waterlooville damage my floor?
We lay protective boards and dust sheets before dismantling, and carry castings rather than dragging them. Original tiles and flagstones in older Waterlooville homes are covered carefully throughout.
How much does AGA removal cost in Waterlooville?
AGA removal in Waterlooville typically costs £350–£550 for a two-oven model and £450–£750 for three or four ovens, including dismantling, clean-up and recycling. Fuel disconnection is extra if needed. Send photos for a fixed price.
How long does AGA removal take?
A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.
Can an AGA be removed in one piece?
Almost never. An assembled AGA is too heavy and too wide for most doorways, and moving it whole risks floor damage and injury. It was built on site from sections and has to come out the same way. Dismantling also allows the insulation to be removed and bagged properly before the castings are carried out.
Helpful guides
How Is an AGA Removed? The Dismantling Process Explained
An AGA is removed by dismantling it where it stands. A qualified engineer makes the fuel supply safe, then the team removes the lids, top…
Read the guide →Asbestos in Old AGAs and Range Cookers: What to Check
Older AGAs, Rayburns and other cast-iron cookers may contain asbestos in rope seals, gaskets, insulation, flue pipes or heat shields. You…
Read the guide →Get a free aga and range cooker removal quote in Waterlooville
Tell us what you need and we'll come back with a clear price.
Request a quote