Inverclyde · Scotland
AGA and Range Cooker Removal in Greenock
Kitchen designers and builders working in Greenock hand us the AGA strip-out so their project starts on a clean slate across Scotland.
Greenock and the surrounding area
Greenock is in the Inverclyde council area in Scotland. Jobs here are mostly in the PA16, PA15 and PA19 postcode areas. The same team covers Port Glasgow, Gourock and Inverkip too.
Working in Greenock
Scotland's towns have a lot of sandstone and granite buildings, tenement flats and harled houses, with Scottish building standards rather than English Building Regulations applying. In older Greenock properties, an AGA may sit in an inglenook or chimney breast, and the surrounding brickwork needs protecting during dismantling. Clifftop and harbourside properties in Greenock can have tricky access, so we review photos of the route before the day. Stone-built houses and tenements in Greenock can have narrow stairs and thick walls, so castings are carried out piece by piece.
Many Greenock families replace an AGA with a modern range during an extension or kitchen refit, and we time the removal to suit the builder. Suburban homes in Greenock usually have a driveway close to the kitchen door, which keeps a long dismantle running smoothly.
Our services in Greenock
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
Guide prices for Greenock
- Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.
- Three or four-oven AGA: £450–£750. Longer dismantle and more castings to carry; route and access affect price.
- Two-oven AGA dismantle and removal: £350–£550. Full on-site strip-down, insulation removal, clean-up and cast-iron recycling.
Prices are a guide. Your quote for Greenock is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Greenock
What about asbestos in my old Greenock AGA?
Older cookers and flues can contain asbestos. If yours is old or its history is unknown, we recommend testing by a qualified surveyor in Greenock before dismantling so any asbestos is removed by trained specialists.
Do you cover Glasgow and Irvine as well as Greenock?
Yes. Our AGA and range cooker removal service covers Greenock and the wider area, including Glasgow and Irvine, along with rural properties across Inverclyde.
How long does AGA removal take in Greenock?
Most two-oven AGA removals in Greenock take three to five hours. Larger models, Rayburns with boilers, or long carries to the van can take most of a day. Switch the cooker off at least 24 hours beforehand.
Do builders in Greenock use your AGA removal service?
Yes. Kitchen designers and builders across Inverclyde use us to remove AGAs before a refit, saving their crews a heavy, dusty day and keeping the Greenock project on schedule.
How long does AGA removal take?
A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.
Can you remove a modern range cooker such as a Rangemaster?
Yes. Modern dual-fuel and gas range cookers are not dismantled like an AGA, but they are heavy and wide. We remove doors, shelves and panels to lighten them, then use skates and trolleys with a three-person team. The gas must be capped by a Gas Safe registered engineer before we move the cooker.
Helpful guides
Asbestos in Old AGAs and Range Cookers: What to Check
Older AGAs, Rayburns and other cast-iron cookers may contain asbestos in rope seals, gaskets, insulation, flue pipes or heat shields. You…
Read the guide →Should You Sell, Recondition or Scrap an Old AGA?
If your AGA has sound castings, decent enamel and a complete set of lids, it may be worth selling to a reconditioner, which can reduce or…
Read the guide →Get a free aga and range cooker removal quote in Greenock
Tell us what you need and we'll come back with a clear price.
Request a quote