AGA and Range Cooker Removal

Guide · Homeowners · 3 min read · Updated 16 November 2026

Should You Sell, Recondition or Scrap an Old AGA?

Short answer

If your AGA has sound castings, decent enamel and a complete set of lids, it may be worth selling to a reconditioner, which can reduce or offset the removal cost. If you want to keep it but cut running costs, conversion to electric is an option. If the castings are cracked or the enamel badly damaged, scrapping for cast-iron recycling is usually the only realistic route.

Should You Sell, Recondition or Scrap an Old AGA?

Your four options

When an AGA or similar range cooker no longer suits the house, there are four realistic routes. You can keep it and convert it, sell it privately as it stands, sell it to a reconditioner who dismantles and restores it, or have it removed and recycled. The right answer depends on the cooker's condition, your timescale and whether you want it out of the house quickly.

In every case, the fuel supply has to be made safe by a qualified person first, and the cooker will almost always be dismantled on site to get it out.

OptionBest whenTypical outcome
Convert to electricYou like the cooker but not the running costCooker stays; conversion cost applies
Sell privatelyGood condition, buyer arranges removalSome return, but buyers can be slow
Sell to a reconditionerSound castings and enamelRemoval cost reduced or offset
Remove and recycleCracked, rusted or heavily wornFull removal price, cast iron recycled

How to judge your cooker's condition

Reconditioners look at the parts that are hardest to replace. The enamel panels should be free from large chips and crazing. The hotplates should be flat and uncracked. The insulated lids should close properly, and the chrome should not be badly pitted. Ovens should show no cracks. A cooker that has been regularly serviced is more appealing than one that has stood unused in a damp house.

Colour matters a little too. Popular colours and recent models are easier to resell. Very old models can still be reconditioned, but some parts become harder to source.

  • Enamel panels: large chips, cracks or crazing
  • Hotplates: flatness and cracks across the surface
  • Lids: chrome condition and whether they close flush
  • Ovens: cracks, heavy rust or warped doors
  • Service history and fuel type
  • Whether all the original parts are present

Selling privately

Selling privately can work if your cooker is in good condition and a buyer is willing to arrange dismantling, transport and reinstallation. The challenge is timing. Buyers often need weeks to organise a specialist, and they may back out once they understand the cost of moving and refitting a cast-iron cooker. If you have a fixed date for a kitchen refit, a private sale adds risk.

Be clear about the fuel type, the model, the number of ovens and any faults. Photos of the hotplates, lids, enamel and oven interiors help buyers decide quickly. Set a clear deadline for collection in the listing, and keep a removal booking as a fallback in case the sale falls through close to your refit date.

Selling to a reconditioner

Reconditioners dismantle cookers, strip and re-enamel panels where needed, replace seals and insulation, and sell the rebuilt cooker on, sometimes converted to a different fuel. They usually value a cooker from photos and the model details. If yours has reuse value, it can reduce the removal price considerably, and occasionally covers most of it.

We give an honest view from photos before you book. If the cooker looks reconditionable, it is dismantled with care, keeping castings and panels intact rather than treating them as scrap.

Converting instead of removing

Many owners remove an AGA because it is expensive to run on oil or gas, or because it heats the kitchen all summer. Conversion to an electric, controllable system is a real alternative. It keeps the cooker in place and lets you switch ovens and hotplates on and off as needed. Conversions are carried out by specialist installers, and the cost varies with the model.

If you love the cooker but not the running costs, get a conversion quote before deciding on removal. If you want the space for a modern kitchen, removal is the cleaner option.

Scrapping and recycling

When a cooker has cracked castings, badly damaged enamel or heavy rust, removal and recycling is the realistic route. The cast iron and steel are recycled as metal, the enamel panels go with the steel, and the insulation is bagged and disposed of correctly. Electric components are treated under the WEEE Regulations.

Removal prices for a two-oven AGA are £350–£550, and £450–£750 for a three or four-oven model. A Rayburn or Stanley with a boiler costs £350–£600. Fuel disconnection adds £75–£150 if it has not been done.

Making the decision

Start with the condition check. If the castings and enamel are sound and you have time, ask for valuations from reconditioners and compare them with a private sale. If you need the kitchen cleared by a fixed date, a reconditioner or a specialist removal with a reconditioning assessment is usually more reliable than waiting for a private buyer.

If you want to keep the character of the cooker but not its running costs, look at conversion. If the cooker is worn out or you simply want the space, choose removal and recycling. Whatever you decide, have the fuel made safe first, test any suspect materials on older cookers and use a registered waste carrier, so the cooker ends up reused or recycled rather than dumped.

Questions people also ask

Is my old AGA worth any money?

It might be. AGAs in good condition, with sound castings, decent enamel and a complete set of lids, can have value to reconditioners. Badly damaged cookers are worth roughly their cast-iron scrap value. Send clear photos of the hotplates, lids and enamel to get an honest assessment.

Can an oil AGA be converted to electric?

Yes, many oil and gas AGAs can be converted to electric by specialist installers, which can make them more controllable and remove the need for an oil supply. The cost depends on the model and conversion type. Get a conversion quote before deciding to remove the cooker if you would like to keep it.

Who pays to remove an AGA if I sell it?

That depends on the agreement. Private buyers usually arrange and pay for dismantling and transport. Reconditioners often handle the dismantling themselves or reduce the removal cost to reflect the cooker's value. Agree in writing who is responsible and when it will be collected.

Written and checked by the AGA and Range Cooker Removal team. Read our editorial policy.

Get a free aga and range cooker removal quote

Tell us what you need and we'll come back with a clear price.

Request a quote