Hertfordshire · Eastern
AGA and Range Cooker Removal in Stevenage
We give Stevenage homeowners an honest view on whether an old AGA could be reconditioned before it is removed.
Find out if your Stevenage AGA is worth reconditioning. Ask us.
Where we work around Stevenage
Stevenage falls within Hertfordshire, Eastern. Postcodes we cover here include SG1, SG2 and SG3. We also take jobs in Knebworth, Walkern, Woolmer Green, Datchworth and Gosmore.
AGA and Range Cooker Removal in Stevenage: local know-how
If your Stevenage AGA sits in a kitchen-diner, we seal off the area as far as possible to limit insulation dust. Many Stevenage families replace an AGA with a modern range during an extension or kitchen refit, and we time the removal to suit the builder.
Across the East of England you find older timber-framed and brick cottages in the villages and large modern estates around the expanding towns. Newer Stevenage homes with electric AGAs or range cookers are usually quicker to clear because there is no flue or fuel line to deal with.
What we can do in Stevenage
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Typical costs in Stevenage
- Fuel disconnection by qualified engineer: £75–£150. Gas Safe, OFTEC or electrical isolation, depending on the cooker's fuel type.
- Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.
- Three or four-oven AGA: £450–£750. Longer dismantle and more castings to carry; route and access affect price.
Prices are a guide. Your quote for Stevenage is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Stevenage
Will AGA removal in Stevenage damage my floor?
We lay protective boards and dust sheets before dismantling, and carry castings rather than dragging them. Original tiles and flagstones in older Stevenage homes are covered carefully throughout.
Is my old AGA in Stevenage worth reconditioning?
It might be. Send photos of the enamel, hotplates, doors and data badge, and we will give an honest view. Good-condition cookers can reduce the removal cost for Stevenage customers.
Can you arrange an engineer to disconnect my AGA in Stevenage?
Yes. We can arrange a Gas Safe engineer, OFTEC technician or electrician in Stevenage, depending on your cooker's fuel, so it is safely isolated before our dismantling team arrives.
What about asbestos in my old Stevenage AGA?
Older cookers and flues can contain asbestos. If yours is old or its history is unknown, we recommend testing by a qualified surveyor in Stevenage before dismantling so any asbestos is removed by trained specialists.
Can you remove a modern range cooker such as a Rangemaster?
Yes. Modern dual-fuel and gas range cookers are not dismantled like an AGA, but they are heavy and wide. We remove doors, shelves and panels to lighten them, then use skates and trolleys with a three-person team. The gas must be capped by a Gas Safe registered engineer before we move the cooker.
What do I do if my Rayburn heats my radiators?
If your Rayburn or Stanley has a boiler, a plumber or heating engineer must drain the heating system and cap the flow and return pipes before removal. You will need another source of heating and hot water ready, or arranged soon after. We can coordinate timing with your heating engineer to keep the gap as short as possible.
Helpful guides
How Is an AGA Removed? The Dismantling Process Explained
An AGA is removed by dismantling it where it stands. A qualified engineer makes the fuel supply safe, then the team removes the lids, top…
Read the guide →Should You Sell, Recondition or Scrap an Old AGA?
If your AGA has sound castings, decent enamel and a complete set of lids, it may be worth selling to a reconditioner, which can reduce or…
Read the guide →Get a free aga and range cooker removal quote in Stevenage
Tell us what you need and we'll come back with a clear price.
Request a quote