Kingston upon Thames · London
AGA and Range Cooker Removal in Surbiton
Farmhouses, townhouses and cottages in Surbiton and nearby Ewell can book fixed-price range cooker removal with a full clean-up.
Find out if your Surbiton AGA is worth reconditioning. Ask us.
Covering Surbiton and nearby
We cover all of Surbiton and the wider Kingston upon Thames area. That includes the KT6, KT5 and KT1 postcode districts. We also take jobs in Twickenham, Kingston upon Thames, Hampton, Morden and New Malden.
What to expect in Surbiton
Much of the capital's housing is Victorian and Edwardian terraces, many split into flats, alongside a large stock of post-war estates and modern apartment blocks. In older Surbiton properties, an AGA may sit in an inglenook or chimney breast, and the surrounding brickwork needs protecting during dismantling.
If your Surbiton AGA sits in a kitchen-diner, we seal off the area as far as possible to limit insulation dust. Many Surbiton families replace an AGA with a modern range during an extension or kitchen refit, and we time the removal to suit the builder.
AGA and Range Cooker Removal services in Surbiton
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA and Range Cooker Removal prices in Surbiton
- Two-oven AGA dismantle and removal: £350–£550. Full on-site strip-down, insulation removal, clean-up and cast-iron recycling.
- Modern range cooker, 90–110cm: £110–£180. Three-person team with skates and trolleys; fuel supply must be capped first.
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
Prices are a guide. Your quote for Surbiton is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Surbiton
Can you arrange an engineer to disconnect my AGA in Surbiton?
Yes. We can arrange a Gas Safe engineer, OFTEC technician or electrician in Surbiton, depending on your cooker's fuel, so it is safely isolated before our dismantling team arrives.
How long does AGA removal take in Surbiton?
Most two-oven AGA removals in Surbiton take three to five hours. Larger models, Rayburns with boilers, or long carries to the van can take most of a day. Switch the cooker off at least 24 hours beforehand.
Do you remove Rayburns in Surbiton?
Yes. We remove Rayburns, Stanleys and Esse cookers in Surbiton and nearby Ewell. If the cooker runs your heating, a plumber must drain and cap the system first, and we can coordinate timings.
Is my old AGA in Surbiton worth reconditioning?
It might be. Send photos of the enamel, hotplates, doors and data badge, and we will give an honest view. Good-condition cookers can reduce the removal cost for Surbiton customers.
How long does AGA removal take?
A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.
Can an AGA be removed in one piece?
Almost never. An assembled AGA is too heavy and too wide for most doorways, and moving it whole risks floor damage and injury. It was built on site from sections and has to come out the same way. Dismantling also allows the insulation to be removed and bagged properly before the castings are carried out.
Helpful guides
How Is an AGA Removed? The Dismantling Process Explained
An AGA is removed by dismantling it where it stands. A qualified engineer makes the fuel supply safe, then the team removes the lids, top…
Read the guide →Should You Sell, Recondition or Scrap an Old AGA?
If your AGA has sound castings, decent enamel and a complete set of lids, it may be worth selling to a reconditioner, which can reduce or…
Read the guide →Get a free aga and range cooker removal quote in Surbiton
Tell us what you need and we'll come back with a clear price.
Request a quote