AGA and Range Cooker Removal

Guide · Homeowners · 4 min read · Updated 16 November 2026

How Much Does AGA Removal Cost in the UK?

Short answer

AGA removal in the UK typically costs £350–£550 for a two-oven model and £450–£750 for a three or four-oven model, including on-site dismantling, insulation removal and cast-iron recycling. A Rayburn or Stanley with a boiler costs £350–£600. Modern 90–110cm range cookers cost £110–£180. Fuel disconnection by a qualified engineer adds £75–£150, and older cookers may need asbestos sampling from £150.

How Much Does AGA Removal Cost in the UK?

Guide prices for AGA and range cooker removal

AGA removal costs far more than ordinary cooker removal because a cast-iron heat-storage cooker cannot be carried out in one piece. A two-oven AGA weighs several hundred kilograms, and a four-oven model can weigh around half a tonne. The cooker has to be taken apart in the kitchen, section by section, with the insulation removed and the castings carried out one at a time. That is skilled, physical work that can take most of a day.

The prices below are typical for reasonable access. We confirm one fixed price before booking, based on the model, fuel type and route out of the property.

JobGuide priceWhat is included
Modern range cooker, 90–110cm£110–£180Three-person team, skates and trolleys
Two-oven AGA£350–£550Dismantle, insulation removal, clean-up, recycling
Three or four-oven AGA£450–£750Longer strip-down, more castings to carry
Rayburn or Stanley with boiler£350–£600After the heating system is drained and capped
Fuel disconnection£75–£150Gas Safe, OFTEC or electrical isolation
Asbestos samplingfrom £150Recommended for older cookers and flues

What drives the price

The number of ovens is the clearest guide to the price, because each oven is a heavy casting that must be separated, lifted and carried. A three or four-oven AGA also has more insulation to remove and more enamel panels to unbolt. Cookers with integrated boilers, such as many Rayburns and Stanleys, add plumbing work and an extra firebox or boiler casting.

Access is the next biggest factor. Steps down into a farmhouse kitchen, narrow passages, gravel drives and a long carry to the van all slow the work down and may mean an extra person. A clear, level route to a van parked close by is the cheapest scenario.

  • Number of ovens and size of the cooker
  • Integrated boiler linked to central heating or hot water
  • Fuel type and whether the supply is already capped
  • Steps, narrow doorways and distance to the van
  • Suspected asbestos in seals, flue pipes or insulation
  • Whether the cooker has resale value to a reconditioner

Fuel disconnection costs

Before any dismantling starts, the fuel supply must be made safe by the right qualified person. Gas and LPG cookers need a Gas Safe registered engineer under the Gas Safety (Installation and Use) Regulations 1998. Oil-fired cookers need an engineer competent in oil firing, commonly OFTEC registered, to isolate the oil line and deal with the burner. Electric AGAs need the dedicated circuit isolated by an electrician.

Fuel disconnection typically costs £75–£150 depending on the fuel and how easy the supply is to reach. We can arrange this for the same day or the day before, or you can use your own engineer. Solid-fuel cookers need the fire out, cold and the ash cleared well in advance.

Can a reconditionable AGA lower the cost?

Yes. There is an established market for reconditioned AGAs, and some older models in reasonable condition have value to specialist reconditioners. Enamel in good order, uncracked castings and a complete set of lids all help. Where a cooker can be reused, the removal price can come down, and in a few cases the cooker covers much of its own removal.

Badly chipped enamel, cracked hotplates, rusted castings and cookers that have been heavily modified are usually worth only their cast-iron scrap value. We give an honest view from photos before you book, so you know whether reconditioning is a realistic route.

Is an AGA worth removing yourself?

Very rarely. Dismantling a cast-iron cooker means lifting single castings that can weigh well over 50 kg, working with loose insulation that sheds dust and fibres, and managing hot or sharp parts. Older cookers may contain asbestos in rope seals, gaskets or flue components, which should be tested before anyone disturbs them. Damage to floors, walls and door frames is common when the work is rushed.

A specialist team brings the right tools, sack trucks, skates and floor protection, and knows the order in which each model comes apart. That saves time, avoids injury and protects the kitchen for whatever goes in next.

What the price includes

Every AGA removal includes on-site dismantling, careful removal and bagging of insulation, carrying the castings and panels out, and a clean-up of the cooker area. The cast iron, steel and enamel are taken for recycling or passed on for reconditioning. Electric components are treated under the WEEE Regulations.

We arrange each job through vetted, insured local specialists who are registered waste carriers. Ask for a waste transfer note if you need one for your records.

Modern range cookers cost much less

A modern 90–110cm range cooker from a brand such as Rangemaster, Falcon or Mercury is a very different job from a cast-iron AGA. It does not store heat, it has no loose insulation to remove and it usually leaves the house in one piece. The cost is £110–£180 for a three-person team with skates and trolleys, once the gas or electric supply has been made safe.

Wider professional-style models, such as 120cm to 150cm cookers, sit towards the top of that range or above it, because they are heavier and may need their doors, pan supports or splashback removed to clear the doorways. Measure the narrowest point of the route and include it in your quote request so the team arrive with the right number of people.

Questions people also ask

Why does AGA removal cost so much more than a normal cooker?

Because an AGA is a heavy cast-iron heat-storage cooker that has to be taken apart in the kitchen before it can be carried out. A two-oven model weighs several hundred kilograms. The strip-down, insulation removal and repeated heavy carries take a skilled team most of a day.

How long does it take to remove an AGA?

A two-oven AGA usually takes a team around half a day to dismantle and carry out with reasonable access. A four-oven model, a cooker with a boiler or a difficult route can stretch the job to most of a day. Fuel disconnection should be done beforehand so the team can start straight away.

Does AGA removal include the flue?

The removal team takes out the flue pipe connected to the cooker once the fuel supply has been made safe. Work on the chimney or external flue terminal may need a separate specialist. Older flue pipes should be tested for asbestos before removal, as some were made from asbestos cement.

Written and checked by the AGA and Range Cooker Removal team. Read our editorial policy.

Get a free aga and range cooker removal quote

Tell us what you need and we'll come back with a clear price.

Request a quote