Kent · South East
AGA and Range Cooker Removal in Gravesend
Replacing an AGA in Gravesend? Our vetted specialists strip it down on site and carry it out, anywhere in Kent.
Find out if your Gravesend AGA is worth reconditioning. Ask us.
Our Gravesend coverage
Gravesend is in the Kent council area in the South East. Jobs here are mostly in the DA12, DA11 and SG11 postcode areas. Nearby places we also cover include Northfleet, Swanscombe, Ebbsfleet Valley, Chadwell St Mary and Tilbury.
Local considerations in Gravesend
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. Victorian and pre-war Gravesend houses often have original tiled or flagstone floors, which we cover with boards before moving castings.
Many Gravesend families replace an AGA with a modern range during an extension or kitchen refit, and we time the removal to suit the builder. If your Gravesend AGA sits in a kitchen-diner, we seal off the area as far as possible to limit insulation dust.
AGA and Range Cooker Removal jobs we handle in Gravesend
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
How much it costs in Gravesend
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
- Fuel disconnection by qualified engineer: £75–£150. Gas Safe, OFTEC or electrical isolation, depending on the cooker's fuel type.
- Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.
Prices are a guide. Your quote for Gravesend is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Gravesend
Do you remove Rayburns in Gravesend?
Yes. We remove Rayburns, Stanleys and Esse cookers in Gravesend and nearby Grays. If the cooker runs your heating, a plumber must drain and cap the system first, and we can coordinate timings.
How much does AGA removal cost in Gravesend?
AGA removal in Gravesend typically costs £350–£550 for a two-oven model and £450–£750 for three or four ovens, including dismantling, clean-up and recycling. Fuel disconnection is extra if needed. Send photos for a fixed price.
Will AGA removal in Gravesend damage my floor?
We lay protective boards and dust sheets before dismantling, and carry castings rather than dragging them. Original tiles and flagstones in older Gravesend homes are covered carefully throughout.
Is my old AGA in Gravesend worth reconditioning?
It might be. Send photos of the enamel, hotplates, doors and data badge, and we will give an honest view. Good-condition cookers can reduce the removal cost for Gravesend customers.
What do I do if my Rayburn heats my radiators?
If your Rayburn or Stanley has a boiler, a plumber or heating engineer must drain the heating system and cap the flow and return pipes before removal. You will need another source of heating and hot water ready, or arranged soon after. We can coordinate timing with your heating engineer to keep the gap as short as possible.
Can an AGA be removed in one piece?
Almost never. An assembled AGA is too heavy and too wide for most doorways, and moving it whole risks floor damage and injury. It was built on site from sections and has to come out the same way. Dismantling also allows the insulation to be removed and bagged properly before the castings are carried out.
Helpful guides
Preparing for AGA or Range Cooker Removal: A Checklist
To prepare for AGA or range cooker removal, book the right engineer to make the fuel safe, turn the cooker off 24 to 48 hours ahead, have…
Read the guide →Should You Sell, Recondition or Scrap an Old AGA?
If your AGA has sound castings, decent enamel and a complete set of lids, it may be worth selling to a reconditioner, which can reduce or…
Read the guide →Get a free aga and range cooker removal quote in Gravesend
Tell us what you need and we'll come back with a clear price.
Request a quote