AGA and Range Cooker Removal

Medway · South East

AGA and Range Cooker Removal in Rochester

We dismantle and remove cast-iron AGAs, Rayburns and range cookers from homes across Rochester, recycling or reconditioning the castings.

Old AGA in Rochester? Request a quote to dismantle and remove it.

Free AGA and Range Cooker Removal quote in Rochester

No obligation. We only use your details to reply about this job.

Rochester and the surrounding area

Rochester is in the Medway council area in the South East. Postcodes we cover here include ME2, ME1, ME3, ME4 and ME5. The same team covers Hoo St Werburgh, Gravesham, Peters Village, Halling and Cliffe Woods too.

Working in Rochester

Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. Post-2000 kitchens in Rochester often have engineered flooring, which we protect with boards and skates throughout.

Many Rochester families replace an AGA with a modern range during an extension or kitchen refit, and we time the removal to suit the builder. Suburban homes in Rochester usually have a driveway close to the kitchen door, which keeps a long dismantle running smoothly.

Guide prices for Rochester

  • Three or four-oven AGA: £450–£750. Longer dismantle and more castings to carry; route and access affect price.
  • Two-oven AGA dismantle and removal: £350–£550. Full on-site strip-down, insulation removal, clean-up and cast-iron recycling.
  • Modern range cooker, 90–110cm: £110–£180. Three-person team with skates and trolleys; fuel supply must be capped first.

Prices are a guide. Your quote for Rochester is a fixed price based on the details you give us. Full price guide.

AGA and Range Cooker Removal questions from Rochester

How long does AGA removal take in Rochester?

Most two-oven AGA removals in Rochester take three to five hours. Larger models, Rayburns with boilers, or long carries to the van can take most of a day. Switch the cooker off at least 24 hours beforehand.

Do builders in Rochester use your AGA removal service?

Yes. Kitchen designers and builders across Medway use us to remove AGAs before a refit, saving their crews a heavy, dusty day and keeping the Rochester project on schedule.

Can you remove a range cooker from my Rochester kitchen?

Yes. We remove modern range cookers in Rochester using a three-person team, skates and trolleys. The gas must be capped by a Gas Safe engineer first, which we can arrange.

Do you remove Rayburns in Rochester?

Yes. We remove Rayburns, Stanleys and Esse cookers in Rochester and nearby Chatham. If the cooker runs your heating, a plumber must drain and cap the system first, and we can coordinate timings.

How long does AGA removal take?

A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.

Can an AGA be removed in one piece?

Almost never. An assembled AGA is too heavy and too wide for most doorways, and moving it whole risks floor damage and injury. It was built on site from sections and has to come out the same way. Dismantling also allows the insulation to be removed and bagged properly before the castings are carried out.

Get a free aga and range cooker removal quote in Rochester

Tell us what you need and we'll come back with a clear price.

Request a quote